Program My Garage

Brands / Chamberlain / Program a Keypad

How to program a Chamberlain keypad

This works for every Chamberlain opener with a coloured Learn button. It takes about a minute. You'll need a step ladder.

  1. Press and release the Learn button on the motor unit. The LED stays lit for about 30 seconds.
  2. Within 30 seconds, type a 4-digit PIN of your choice on the keypad.
  3. Press and hold the Enter button (or the up/down button on some keypads) until the opener lights blink.
  4. Test it: type your PIN and press Enter. The door should move.

After programming: test the safety reverse. Put a piece of wood or a roll of paper towels flat under the door and close it. The door should touch it and go back up. If it doesn't, don't use the opener until it's fixed.

Steps for your exact Chamberlain model

More Chamberlain guides