Program My Garage

Remotes and keypads / LiftMaster L992U

LiftMaster L992U Remote

Description
2-Button Universal Remote Control
Type
universal, 2 buttons
Opener brands
LiftMaster, Raynor

Works with these Learn buttons

White (round)Yellow (round)Purple (may fade to brown)Red / orangeGreen

Check price on Amazon

✓ Checked against the maker's instructions · LiftMaster compatibility list

How to program the L992U

  1. Find the Learn button on the motor unit. It is on the back or side, near where the antenna wire hangs down, and sometimes under the light cover.
  2. Press and release the Learn button once. Do not hold it, or you will erase your remotes. The small LED next to it stays lit for about 30 seconds.
  3. Within those 30 seconds, press and hold the remote button you want to use.
  4. Let go when the opener lights blink or you hear two clicks.
  5. Press the remote button again. The door should move. If not, repeat from step 2.

Openers it works with

Showing 60 of 247. Any opener with a matching Learn button colour works.