Learn button colours / Blue (replacement board)

Blue

How to program a remote to a blue (replacement board) Learn button

1. Find the Learn button on the motor unit. It is on the back or side, near where the antenna wire hangs down, and sometimes under the light cover.
2. Press and release the Learn button once. Do not hold it, or you will erase your remotes. The small LED next to it stays lit for about 30 seconds.
3. Within those 30 seconds, press and hold the remote button you want to use.
4. Let go when the opener lights blink or you hear two clicks.
5. Press the remote button again. The door should move. If not, repeat from step 2.

Other colours

• White (round) · Security+ 3.0
• Yellow (round) · Security+ 2.0
• Purple (may fade to brown) · Security+
• Red / orange · Security+
• Green · Billion Code
• Yellow square / white / gray (DIP switch) · DIP switch